View LM117K_4951136.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

POSITIVE ADJUSTABLE VOLTAGE REGULATOR
IP117K IP117AK IP117HVK IP117AHVK IP317K IP317AK IP317HVK IP317AHVK / / / / / / / / LM117K LM117AK LM117HVK LM117AHVK LM317K LM317AK LM317HVK LM317AHVK
FEATURES
* * * * * 1.5A Output Current Guaranteed Internal Thermal Overload Protection Output Short Circuit Protected Hermetic Metal TO3 Package Screening Options Available
APPLICATIONS
* * * Adjustable Power Supplies System Power Supplies Precision Voltage / Current Regulators
DESCRIPTION
The 117/317 Series regulators are adjustable 3 terminal voltage regulators capable of supplying in excess of 1.5A over an output voltage range of 1.25V to 40V (HV Series, 60V). The regulators are exceptionally easy to apply requiring only 2 external resistors to set the output voltage. Every effort has been made to make these devices easy to use and difficult to damage. Internal current limiting and power limiting coupled with true thermal limiting prevents damage due to overloads or shorts, even if the regulators are not fastened to a heat sink.
ABSOLUTE MAXIMUM RATINGS (TC = 25C unless otherwise stated)
VI - VO IO PD TJ Tstg Input - Output Voltage Differential Output Current Power Dissipation Operating Junction Temperature Range Storage Temperature Range 117 Series 317 Series Standard HV Series 40V 60V Internally Limited Internally Limited -55 to +150C 0 to +125C -65 to +150C
THERMAL PROPERTIES
Symbols
RJC
Parameters
Thermal Resistance, Junction To Case
Min.
Typ.
Max.
3
Units
C/W
** This datasheet supersedes document 2829
Semelab Limited reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Coventry Road, Lutterworth, Leicestershire, LE17 4JB Semelab Limited Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Document Number 8375 Issue 1 Page 1 of 7
Website: http://www.semelab-tt.com
POSITIVE ADJUSTABLE VOLTAGE REGULATOR
ELECTRICAL CHARACTERISTICS(1)(3) (TC = 25C unless otherwise stated)
LM117, IP117, LM117HV, IP117HV Symbols
VREF
Parameters
Reference Voltage
Test Conditions
IOUT = 10mA 10mA IOUT IMAX, P PMAX, 3V (VIN-VOUT) VMAX 3V (VIN-VOUT) VMAX, IOUT = 10mA VOUT 5V
Min.
1.200
Typ
1.250 1.250 0.010
Max.
1.300
Units
V
*
1.200
1.300 0.020 0.050 15 0.3 50
1.0 0.070
VOUT VIN
Line Regulation (2)
*
%/V mV % mV
% %/W dB
0.020 5 0.1
VOUT IOUT
Load Regulation (2)(3)
10mA IOUT IMAX
VOUT 5V VOUT 5V
VOUT 5V
* *
20
0.3 0.030 65 66 80 50 0.2 3.5 3.5 1.5 0.3 2.2 0.5 0.1 1.0
0.3 0.001
Thermal Regulation Ripple Rejection IADJ Adjust Pin Current Adjust Pin Current Change
VIN = 14.58V, IOUT = 1.5A, PD = 20W, TA = 25C, 20ms Pulse VOUT = 10V f = 120Hz CADJ = 0 CADJ = 10F *
*
10mA IOUT IMAX, 2.5V (VIN-VOUT) VMAX (VIN - VOUT) = 40V (VIN - VOUT) = 60V (HV Series) (VIN - VOUT) 15V
100 A 5 5 7
IADJ
IMIN
* * * * * * *
Minimum Load Current
mA
ICL
Current Limit
(VIN - VOUT) = 40V (VIN - VOUT) = 60V (HV Series)
A
VOUT TEMP VOUT TIME
en
Temperature Stability
Long Term Stability RMS Output Noise (% of VOUT) TA = 125C, 1000Hrs TA = 25C, 10Hz f 10KHz
1.0
%
Notes The denotes the specifications which apply over the full operating temperature range. (1) (2) Test conditions unless otherwise stated: VIN - VOUT = 5V, IOUT = 0.5A, PMAX = 20W, IMAX = 1.5A Regulation is measured at constant junction temperature, using pulse testing at a low duty cycle. Changes in output voltage due to heating effects are covered under thermal regulation specifications. Load regulation is measured at 1/8" below the bottom of the package. VMAX = 40V for LM117, IP117, LM117A, IP117A, LM317, IP317, LM317A, IP317A VMAX = 60V for LM117HV, IP117HV, LM117AHV, IP117AHV, LM317HV, IP317HV, LM317AHV, IP317AHV
(3)
Coventry Road, Lutterworth, Leicestershire, LE17 4JB Semelab Limited Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com
Website: http://www.semelab-tt.com
Document Number 8375 Issue 1 Page 2 of 7
POSITIVE ADJUSTABLE VOLTAGE REGULATOR
ELECTRICAL CHARACTERISTICS(1)(3) (TC = 25C unless otherwise stated)
LM117A, IP117A, LM117AHV, IP117AHV Symbols
VREF
Parameters
Reference Voltage
Test Conditions
IOUT = 10mA 10mA IOUT IMAX, P PMAX, 3V (VIN-VOUT) VMAX 3V (VIN-VOUT) VMAX, IOUT = 10mA VOUT 5V
Min.
1.238
Typ
1.250 1.250 0.005
Max.
1.262
Units
V
1.225
1.270 0.010 0.020 15 0.3 50 1.0 0.020 mV % mV % %/W %/V
VOUT VIN
Line Regulation (2)
0.010 5 0.1
VOUT IOUT
Load Regulation (2)(3)
10mA IOUT IMAX
VOUT 5V VOUT 5V VOUT 5V

15 0.3 0.002 65 66 80 50 0.2 3.5 3.5 1.5 0.3 2.2 0.5 0.1 1.0 0.3 0.001
Thermal Regulation
VIN = 14.58V, IOUT = 1.5A, PD = 20W, TA = 25C, 20ms Pulse VOUT = 10V f = 120Hz CADJ = 0 CADJ = 10F
Ripple Rejection IADJ Adjust Pin Current Adjust Pin Current Change
dB 100 A 5 5 7
10mA IOUT IMAX, 2.5V (VIN-VOUT) VMAX (VIN - VOUT) = 40V (VIN - VOUT) = 60V (HV Series) (VIN - VOUT) 15V
IADJ
IMIN
*
Minimum Load Current
mA
ICL
Current Limit
(VIN - VOUT) = 40V (VIN - VOUT) = 60V (HV Series)
A
VOUT TEMP VOUT TIME
en
Temperature Stability Long Term Stability RMS Output Noise (% of VOUT) TA = 125C, 1000Hrs TA = 25C, 10Hz f 10KHz
2 1.0 %
Notes The denotes the specifications which apply over the full operating temperature range. (1) (2) Test conditions unless otherwise stated: VIN - VOUT = 5V, IOUT = 0.5A, PMAX = 20W, IMAX = 1.5A Regulation is measured at constant junction temperature, using pulse testing at a low duty cycle. Changes in output voltage due to heating effects are covered under thermal regulation specifications. Load regulation is measured at 1/8" below the bottom of the package. VMAX = 40V for LM117, IP117, LM117A, IP117A, LM317, IP317, LM317A, IP317A VMAX = 60V for LM117HV, IP117HV, LM117AHV, IP117AHV, LM317HV, IP317HV, LM317AHV, IP317AHV
(3)
Coventry Road, Lutterworth, Leicestershire, LE17 4JB Semelab Limited Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com
Website: http://www.semelab-tt.com
Document Number 8375 Issue 1 Page 3 of 7
POSITIVE ADJUSTABLE VOLTAGE REGULATOR
ELECTRICAL CHARACTERISTICS(1)(3) (TC = 25C unless otherwise stated)
LM317, IP317, LM317HV, IP317HV Symbols
VREF
Parameters
Reference Voltage
Test Conditions
IOUT = 10mA 10mA IOUT IMAX, P PMAX, 3V (VIN-VOUT) VMAX 3V (VIN-VOUT) VMAX, IOUT = 10mA VOUT 5V
Min.
1.200
Typ
1.250 1.250 0.010
Max.
1.300
Units
V
1.200
1.300 0.040 0.070 25 0.5 70 1.5 0.070 mV % mV % %/W dB 100 A 5 10 12
VOUT VIN
Line Regulation (2)
%/V
0.020 5 0.1
VOUT IOUT
Load Regulation (2)(3)
10mA IOUT IMAX
VOUT 5V VOUT 5V VOUT 5V

20 0.3 0.030 65 66 80 50 0.2 3.5 3.5 1.5 0.15 2.2 0.4 0.1 1.0 0.3 0.003
Thermal Regulation Ripple Rejection IADJ Adjust Pin Current Adjust Pin Current Change
VIN = 14.58V, IOUT = 1.5A, PD = 20W, TA = 25C, 20ms Pulse VOUT = 10V f = 120Hz CADJ = 0 CADJ = 10F
10mA IOUT IMAX, 2.5V (VIN-VOUT) VMAX (VIN - VOUT) = 40V (VIN - VOUT) = 60V (HV Series) (VIN - VOUT) 15V
IADJ
IMIN
*
Minimum Load Current
mA
ICL
Current Limit
(VIN - VOUT) = 40V (VIN - VOUT) = 60V (HV Series)
A
VOUT TEMP VOUT TIME
en
Temperature Stability Long Term Stability RMS Output Noise (% of VOUT) TA = 125C, 1000Hrs TA = 25C, 10Hz f 10KHz
1.0
%
Notes The denotes the specifications which apply over the full operating temperature range. (1) (2) Test conditions unless otherwise stated: VIN - VOUT = 5V, IOUT = 0.5A, PMAX = 20W, IMAX = 1.5A Regulation is measured at constant junction temperature, using pulse testing at a low duty cycle. Changes in output voltage due to heating effects are covered under thermal regulation specifications. Load regulation is measured at 1/8" below the bottom of the package. VMAX = 40V for LM117, IP117, LM117A, IP117A, LM317, IP317, LM317A, IP317A VMAX = 60V for LM117HV, IP117HV, LM117AHV, IP117AHV, LM317HV, IP317HV, LM317AHV, IP317AHV
(3)
Coventry Road, Lutterworth, Leicestershire, LE17 4JB Semelab Limited Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com
Website: http://www.semelab-tt.com
Document Number 8375 Issue 1 Page 4 of 7
POSITIVE ADJUSTABLE VOLTAGE REGULATOR
ELECTRICAL CHARACTERISTICS(1)(3) (TC = 25C unless otherwise stated)
LM317A, IP317A, LM317AHV, IP317AHV Symbols
VREF
Parameters
Reference Voltage
Test Conditions
IOUT = 10mA 10mA IOUT IMAX, P PMAX, 3V (VIN-VOUT) VMAX 3V (VIN-VOUT) VMAX, IOUT = 10mA VOUT 5V
Min.
1.238
Typ
1.250 1.250 0.005
Max.
1.262
Units
V
1.225
1.270 0.010 0.020 25 0.5 50 1.0 0.020 mV % mV % %/W %/V
VOUT VIN
Line Regulation (2)
0.010 5 0.1
VOUT IOUT
Load Regulation (2)(3)
10mA IOUT IMAX
VOUT 5V VOUT 5V VOUT 5V

15 0.3 0.002 65 66 80 50 0.2 3.5 3.5 1.5 0.15 2.2 0.4 0.1 1.0 0.3 0.003
Thermal Regulation
VIN = 14.58V, IOUT = 1.5A, PD = 20W, TA = 25C, 20ms Pulse VOUT = 10V f = 120Hz CADJ = 0 CADJ = 10F
Ripple Rejection IADJ Adjust Pin Current Adjust Pin Current Change
dB 100 A 5 10 12
10mA IOUT IMAX, 2.5V (VIN-VOUT) VMAX (VIN - VOUT) = 40V (VIN - VOUT) = 60V (HV Series) (VIN - VOUT) 15V
IADJ
IMIN
*
Minimum Load Current
mA
ICL
Current Limit
(VIN - VOUT) = 40V (VIN - VOUT) = 60V (HV Series)
A
VOUT TEMP VOUT TIME
en
Temperature Stability Long Term Stability RMS Output Noise (% of VOUT) TA = 125C, 1000Hrs TA = 25C, 10Hz f 10KHz
2 1.0 %
Notes The denotes the specifications which apply over the full operating temperature range. (1) (2) Test conditions unless otherwise stated: VIN - VOUT = 5V, IOUT = 0.5A, PMAX = 20W, IMAX = 1.5A Regulation is measured at constant junction temperature, using pulse testing at a low duty cycle. Changes in output voltage due to heating effects are covered under thermal regulation specifications. Load regulation is measured at 1/8" below the bottom of the package. VMAX = 40V for LM117, IP117, LM117A, IP117A, LM317, IP317, LM317A, IP317A VMAX = 60V for LM117HV, IP117HV, LM117AHV, IP117AHV, LM317HV, IP317HV, LM317AHV, IP317AHV
(3)
Coventry Road, Lutterworth, Leicestershire, LE17 4JB Semelab Limited Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com
Website: http://www.semelab-tt.com
Document Number 8375 Issue 1 Page 5 of 7
POSITIVE ADJUSTABLE VOLTAGE REGULATOR
APPLICATIONS INFORMATION
IP117 IP317A
VIN VIN ADJ VO U T R P (Max Drop 300mV) OUTPUT
IP117 IP 317A
VIN VIN ADJ
1F
2
VO U T
121
5V VO U T
VIN
7
25 121
6 1
LM301A
3 8 4
1k
RL
5F
TTL
1k
2N3904
1k
383
383 25
RETURN
RETURN
Remote Sensing
5V Regulator with Shut Down
IP117 IP317A
+24V VIN ADJ
1F
IP117 IP317A
VO U T
249 1%
To VPP
VIN
VIN ADJ
1F
VO U T
R1 121
5V
750 1%
R2 383
C1 10 F
READ
39k
3.24k 1%
WRITE To OE BYTE ERASE
18k
C1 improves ripple rejection Xc should be small compared to R2
Improving Ripple Rejection
All gates 7406.
VIN 1N4001 VIN ADJ
243 10k 50
CHIP ERASE
100k
IP317A IP117
VO U T
READ WRITE BYTE CHIP ERASE
OE 0V
Vpp 5V
2N3906
THERMALLY COUPLE
12V 20k
5V 21V 12V 21V
50k
2816 EEPROM Supply Programmer for Read / Write Control
Temperature Compensated Lead-Acid Battery Charger
Coventry Road, Lutterworth, Leicestershire, LE17 4JB Semelab Limited Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com
Website: http://www.semelab-tt.com
Document Number 8375 Issue 1 Page 6 of 7
POSITIVE ADJUSTABLE VOLTAGE REGULATOR
MECHANICAL DATA
Dimensions in mm (inches)
25.15 (0.99) 26.67 (1.05) 10.67 (0.42) 11.18 (0.44) 1.52 (0.06) 3.43 (0.135)
6.35 (0.25) 9.15 (0.36)
38.61 (1.52) 39.12 (1.54)
0.97 (0.060) 1.10 (0.043)
29.9 (1.177) 30.4 (1.197)
16.64 (0.655) 17.15 (0.675)
1
2
3 (case) 3.84 (0.151) 4.09 (0.161) 7.92 (0.312) 12.70 (0.50)
TO3 (TO-204AA) Pin 1 = ADJ. Pin 2 = VIN Case = VOUT
Coventry Road, Lutterworth, Leicestershire, LE17 4JB Semelab Limited Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com
Website: http://www.semelab-tt.com
Document Number 8375 Issue 1 Page 7 of 7
22.23 (0.875) max.

▲Up To Search▲

Price & Availability of LM117K

	To Download LM117K Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .